CONFORAMA SABA TGV60N3F/C Mode D'emploi page 68

• Thoroughly remove saltyfoods or liquids from the hob as soon
as possible to avoid the risk of corrosion.
• Stainless steel parts ofthe appliance may become discoloured
over time. This is normal because of the high temperatures.
Each time the appliance is used these parts should be cleaned
with a product that is suitable for stainless steel.
Burners
• Remove the burner lids and Flame Spreaders by pulling them
upwards and away from the top plate.
GB
• Soak them in hot water and a little detergent or washing up
liqui.
• After cleaning and washing them, wipe and dry them carefully.
Make sure that the flame holes are clean and completely dry.
• Wipe the fixed parts of the burner cup with a damp cloth and
dry afterwards.
• Gently wipe the ignition device and flame supervision device
with a well wrung-out cloth and wipe dry with a clean cloth.
• Before placing the burners back on the top plate, make sure
that the injector is not blocked.
23