Publicité
Les langues disponibles
Les langues disponibles
Use of the leaf-blower
Read and understand all the warnings before you start using the leaf-blower.
-
-
Hold the leaf-blower firmly and slide the on/off switch forward. Select the ventilator
speed, mode I or II.
-
Direct the airflow downwards and slowly walk forwards.
Move the blowing channel back and forth with the blowing opening 5-10 cm above the
ground.
Switch off the leaf-blower by again turning the on/off switch to OFF (0) and wait until all
-
rotating parts have come to a standstill before you store the device.
-
Cleaning, maintenance and storage
-
Remove the plug from the socket, remove the battery from the device before you clean
the device, assemble / disassemble the blowing channel or store the device.
Check if the switch operates smoothly and is not obstructed by rubbish.
-
Always keep the air inlet openings of the engine case clean to avoid overheating of the
-
engine.
Never spray or rinse your device clean with water but clean it with a moist cloth. Do not
-
use cleaning agents on plastic parts of the leaf-blower they may damage the material!
Let the engine case dry carefully.
-
Only store the device in a dry, frost-free space out of reach of children.
37
Publicité
