Publicité
Les langues disponibles
Les langues disponibles
Description and assembly
1. Blow channel (2 parts)
2. Blow channel lock button
3. On/off switch
Do not use the machine before it is completely assembled, as in the picture above!
Assembly of the leaf-blower
-
Slide both parts of the blowing channel in each other until you hear a click.
-
Potentially remove the battery from the leaf-blower before you assemble or disassemble
the blowing channel and set the on/off switch to off (0).
-
Press the blowing channel on the leaf-blower until you hear a click and the security
button is fully visible in the notch.
-
To remove the blowing channel again solidly press the security button and
simultaneously pull the blowing channel from the leaf-blower.
Charging the battery
The battery must be charged before the leaf-blower can be used.
After you have first charged the battery, use the leaf-blower until the battery has fully been
de-charged. Repeat this 4 to 5 times.
Place the battery charger on a solid underground and place the plug in a 220/240 Volt
-
50 Hz socket.
The red light on the battery charger now lights up.
-
Slide the battery delivered with the leaf-blower in the battery charger until you hear a
-
click.
(the metal plates of the battery charger in the grooves on the battery )
35
4. Handle
5. Battery
6. Battery charger
Publicité
