Rubber Feet Installation - Napoleon NEFL42HS Manuel D'installation Et D'opération

installation
EN
3.5

rubber feet installation

A.
Place the appliance face down on a soft surface.
B.
Remove the screws (4 for NEFL42/50/60HS/HI; 6 for NEFL72/100HS/HI) from the bottom of the
appliance (Fig. 3-10). Set the screws aside.
C.
Install the rubber feet (supplied) (4 for NEFL42/50/60HS/HI; 6 for NEFL72/100HS/HI) using the screws
previously removed in step B (Fig. 3-11).
note:
The screws for installing the rubber feet are secured to the appliance. Removal of the screws is
necessary for installing the rubber feet.
18
W415-2005 / A / 06.26.19
C x 4
Fig. 3-10
C x 6
Fig. 3-10
Fig. 3-11
Fig. 3-11