Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Before turning on
After unpacking, remove all packaging and advertising labels.
It is necessary to prepare the record player before first use. Proceed according to the following instruc-
tions:
• Release the clamp on the arm of the record player (see figure 1).
• Remove the needle cover (see figure 2).
Installation and Connection
• Before first connecting the appliance, carefully read the user's manual.
• Make sure that the appliance is turned off and disconnected from the mains power supply before
performing the connection.
1. Connect the AC/DC adapter to a power socket and DC input jack (12).
2. Using an RCA cable, connect the record player (LINE OUT jacks (11/12)) with the input connector
from the external device (e.g. amplifier or receiver).
L (white) === L channel
R (red) === R channel
12
Operation
www.auna.de
Publicité
Table des Matières
