Safety Instructions - auna TT-10 BT Mode D'emploi

• As the unit may become warm during operation, always leave sufficient space around the unit for
ventilation.
• The voltage supplied to the unit should match the voltage printed on the rear panel. If you are in any
doubt regarding this matter, consult an electrician.
• Choose the installation location of your unit carefully. Avoid placing it in direct sunlight or close to a
source of heat. Also, avoid locations subject to vibrations and excessive dust, heat, cold or moisture.
• Do not place the unit on an amplifier/receiver.
• Do not open the cabinet as this might result in damage to the circuitry and may cause electrical
shock. If a foreign object should get into the unit, contact a service company.
• When removing the power plug from the wall outlet, always pull directly on the plug, never pull from
the cord.
• To keep the CD laser pickup clean, be sure not to touch it. Always close to disc tray after inserting
or removing a CD.
• Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean,
dry cloth.
• Keep this manual in a safe place for future reference.
• DO NOT MOVE THE UNIT DURING PLAYBACK: During playback, the disc rotates at high speed. Do
NOT lift or move the unit during playback. Doing so may damage the disc or the unit.
• The product should not be exposed to moist areas where water can drip or splash on the unit. Ob-
jects filled with liquids, such as vases, should NOT be placed on the product.
• Do not install this equipment in a confined space such as a book case, small cabinet, etc.
Record handling
• Do not touch the grooves on the record. Only handle records by the edges or the label. Make sure
your hands are clean. Skin oils from even clean hands can leave a residue on the record surface that
will gradually deteriorate the quality of your record.
• Keep your records away from dust. Keep them in a cool, dry place.
• To avoid dust and scratches, keep records in the sleeves and jackets when not in use.
• Do not expose records to direct sunlight or high humidity and temperature. Long exposure to high
temperatures will warp the record.
• Should the record become dirty, gently wipe the surface in a circular motion, using a soft and anti-
static cloth.
10

Safety Instructions

www.auna.de