s t a n D a r D
after having installed and connected c57ct,
in setting the switch on aUto
c57ct runs with pre-set standard operating time and temperature
Verify that the switch postion is set on heating
from monday DaY 1 to friday DaY 5
20 c°
17 c°
5 c°
6.30
8.30
c U s t o m i Z e
For every 30 minutes sector it is possible to set desired temperature.
1
set temperature
t
t
min
maX
3
in pushing one of the three keys,
it is possible to set the desired
temperature. the flashing sector
will change colour and advance 30
minutes.
t
comFort /
maX
oFF
to move the sectors without changing
temperatures use keys
J o l l Y
F U n c t i o n
With this function c57ct enables you to cut out temporarily the automatic program
at any time, without changing its settings, in order to have constantly the required
temperature comFort - economY - oFF for a period from 1 to 240 hours.
aUto
With switches set like the picture push the keys
to select for how many hours c57ct cuts out the automatic
program and forces temporaly the temperature. the ring on the
display will take on the colour oh the selected temperature
economY /
once the time set has elapsed c57ct will resume the automatic program. to shorten or to cut out the
"JollY" period before the set time, press a key of different colour than the one corresponding to display
ring.
8
11.30 13.30
17
22
t
economY /
min
t
min
from saturday DaY 6 to sunday DaY 7
20 c°
5 c°
AUTO
once finished to programme
the first day you can either
copy the programme for the
following days in pushing
coPY or push DaY to change
the day.
t
comFort /
maX
intellitherm
P r o G r a m s
aUto
8
23.30
move switches on position
aUto and ProG to start
programming.
the display will show time
00.00 and DaY1.
on the programming ring the
sector which the temperature
has to be changed flashes and
corresponding time appears.
4
once finished the changes
position the switch on
to start the heating system or
on
for the air conditioning
or
or
oFF
2
5
e n g l i s h