Dometic PERFECTVIEW M 55LX AHD Instructions De Montage Et De Service page 19

M55LX AHD, M75LX AHD
8.3 Setting the monitor
To set the monitor to suit your requirements, proceed as follows (fig. 0, page 6):
➤ Press the
button (5) to call up the required parameter.
✓ The parameters to be set appear in the following order:
Page 1: Picture
– Brightness: 0 – 100
– Contrast: 0 – 100
– Colour: 0 – 100
– Volume: 0 – 100
– Auto Dim On, Off
– Distance: distance marker setting (chapter "Setting the distance markers" on page 20)
Page 2: Options
– Language: German, English, French, Italian, Dutch, Spanish, Portuguese, Russian
– Scale: On, Off
(switches the distance markers on or off)
– Camera 1/Camera 2/Camera 3/Camera 4: Normal or Mirrored
– Sensitivity: 1, 2
Setting of the switching threshold for the night dimmer function to avoid glare.
In dimming mode, the switching threshold can be set at two levels.
– Trailer detection ON/OFF: Shortens the activation time in OFF mode
Page 3: Auto search
– Automatic search: On, Off
Switches the automatic camera panning on (the cameras are activated in preset time
intervals, e.g. for horse transporters with multi-box monitoring).
– Camera Delay: Setting of the delay intervals (2 to 20 s)
– Default: Default setting for all parameters
➤ Press the "+" button (3) or the "–" button (4) to set the required parameter.
➤ Press the "+" button (3) to increase the value of the selected parameter.
➤ Press the "–" button (4) to reduce the value of the selected parameter.
8.4 Setting the video source
Proceed as follows to set the video source (fig. 0, page 6):
➤ If you want to switch to a different video source, press the "CAM" button (6).
✓ The monitor changes the camera in the order "Camera 1 – Camera 2 – Camera 3 – Camera 4".
I
NOTE
If you want the cameras to run automatically: see chapter "Setting the automatic
search" on page 20.
EN
Using the LCD monitor
19