Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Unit 2
Channel
From
0
6
8
7
0
0
8
9
9
0
10
0
Unit 3
Channel
From
0
11
8
12
0
0
13
9
14
0
15
0
Unit 4
Channel
From
0
16
8
17
0
0
18
9
19
0
20
0
8.
Cleaning and Maintenance
•
All screws should be tightened and free of corrosion.
•
The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in mounting
supports, do not change the location of the connections...
•
Mechanically moving parts must not show any signs of wear and tear.
•
The electric power supply cables must not show any damage. Have a qualified technician maintain the
device.
•
Disconnect the device from the mains prior to maintenance activities.
•
Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
•
There are no user-serviceable parts, apart from the fuse.
•
Contact your dealer for spare parts if necessary.
Replacing the Fuse
Only replace the fuse by a fuse of the same type and rating.
1. Before replacing the fuse, unplug the mains lead.
2. Wedge the fuse holder out of its housing with a flat-head screwdriver.
3. Remove the damaged fuse from its holder and replace with the exact same type of fuse.
4. Insert the fuse holder back in its place and reconnect power.
V. 01 – 19/07/2012
VDPL4300SC
To
Description
7
Off
255
Colour selection: same as for head 1 (see channel 1)
255
Dimmer
8
Open
255
Strobe slow to fast
255
X-axis motor of head 2
255
Y-axis motor of head 2
To
Description
7
Off
255
Colour selection: same as for head 1 (see channel 1)
255
Dimmer
8
Open
255
Strobe slow to fast
255
X-axis motor of head 3
255
Y-axis motor of head 3
To
Description
7
Off
255
Colour selection: same as for head 1 (see channel 1)
255
Dimmer
8
Open
255
Strobe slow to fast
255
X-axis motor of head 4
255
Y-axis motor of head 4
8
©Velleman nv
Publicité
Table des Matières
