Care Of Stainless Steel Parts; Storage - Beem Ecco De Luxe Mode D'emploi

Ecco De Luxe 4 in 1
Put the thermos jug (19) with lid (20)
‹
onto the resting plate (18).
Switch on the coffee machine.
‹
Wait until approximately one cup has
‹
run through and then switch off the
coffee machine.
Allow the descaling solution to soak
‹
for approximately 10 minutes and
switch on the coffee machine again.
The descaling procedure is com-
‹
plete when all of the solution has run
through.
After descaling, repeat the procedure
‹
twice with fresh water to rinse the cof-
fee machine.
Rinse the thermos jug (19), lid (20),
‹
filter holder (23) and permanent filter
(24) thoroughly under running water.
Push the drip-stop (21) several times
‹
while rinsing.
NOTE
► If you use a commercially available
descaling agent, observe the manu-
facturer's instructions for use.
► If the appliance is severely scaled,
it may be necessary to repeat the
descaling process.
32

Care of stainless steel parts

We recommend using INOX-METAL-
POLISH from BEEM for regular mainte-
nance and the removal of difficult stains
from stainless steel surfaces. The polish
restores appliances to their original shine.
INOX-METAL-POLISH is available in
tubes and is suitable for pots as well as
for other objects made of stainless steel,
chromium, brass, copper, aluminium, sil-
ver and also hard plastics. INOX-METAL-
POLISH is used in factories for polishing
stainless steel.
You can obtain INOX-METAL-POLISH
from your retailer or by phoning us or visit-
ing our website at www.beem.de .

Storage

If you do not intend to use the appliance
for a longer period of time, empty and
clean it as described in the section Clean-
ing and maintenance (page 30). Store
the appliance and all accessory parts at a
dry, clean and frost-free location which is
protected against direct sunlight.
BEEM - Elements of Lifestyle
EN