EN
Cleaning and Care
NOTICE
•
Do not use any toxic, corrosive or abrasive cleaning agents or scouring sponges to clean
the device. These can damage the surface.
1. Wait until the device has completely cooled down.
2. Take the paper fi lter with the coffee grounds out of the fi lter cone (12).
3. Clean the fi lter cone, the carafe (8) and the fi lter support (11) with mild detergent and
warm water.
4. Wipe down the housing of the main device (13) with a damp cloth. If necessary, use a little
mild detergent to remove more intense soiling.
5. Check the mains cable regularly for any damage.
Descaling
Limescale deposits have an adverse effect not only on the quality of the coffee, but they also
cause power losses and shorten the lifespan of the device. The thicker a limescale layer is, the
more diffi cult it is to remove.
After 50 brewing processes, the LED of the Clean program starts to fl ash, indicating that the
device needs to be descaled.
For descaling we recommend the BEEM premium descaler concentrate. The effi cient, food-safe
and environmentally friendly BEEM premium descaler concentrate is available from selected
specialist stockists, via our website www.beem.de or from our customer service department on
request.
Descaling with the BEEM Premium Descaler Concentrate
With the Clean program, the high temperature may cause a little water to splash out of
the water tank (14) at the end of the boiling process.
1. Fill the water tank with a concentrate/water solution of no more than 1:20 (one part
concentrate to 20 parts water) (see the "Preparation" chapter – "Filling the Water Tank").
Please Note: The carafe has a useful volume of no more than 750 ml! It must not be
overfi lled!
2. Place the carafe (8) in the main device (13) on the scale (10).
3. Turn the rotary knob (3) to the Clean position. The temperature "100 °C" appears on the
display.
03597_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 40
03597_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 40
40
18.12.2018 10:50:07
18.12.2018 10:50:07