Kostenlose Service-Hotline: 08 00. 7 86; Gratis Service-Hotline: 08 00. 7 86; Ligne D'assistance Sav Gratuite: +49 800 7 86; Housing Assembly - Storch Scirocco 3000 Mode D'emploi

Housing assembly:

To assemble the heater housing use the supplied M 8 x 28 screws and mount it in accor-
dance with the illustration.

Cleaning and maintenance:

Before cleaning the device, disconnect the mains plug from the socket and
allow it to cool down.
The housing can get dirty rather easily; wipe it clean with a soft cloth or sponge. Wipe
heavily contaminated areas with a sponge that has been dipped in warm water and deter-
gent, then dry the housing with a clean cloth. When doing this, take care to ensure water
does not enter the device.
Do not spray any water onto the heater and do not use any solvents or flam-
mable products, such as cellulose thinners, turpentine or petrol, etc. to clean
the heater. Clean, dry and store the device in its original packaging.
Before storing the heater always allow it to cool down completely; store it in
a dry place.
Adjusting knob
M8x28 Screw
47