Loewe DS440 Mode D'emploi page 29

Internet update
The update starts and a message is displayed.
End the update program with Finish.
Reading out the STB code
You can read out the currently set STB code (in the following example code
"359").
_33153_Assist_STB_Buch_DE-SE.ind29 29 _33153_Assist_STB_Buch_DE-SE.ind29 29
Loewe Assist Update
Update successful!
The code 345 has been successfully activated on key STB.
You can now disconnect the USB connector and close this program!
Press the STB button for at least 5 seconds.
The LED above the STB button flashes twice.
Enter code 002.
The LED above the STB button flashes twice.
Press button 1 to determine the first (left) position of the
three-digit code. The LED flashes 3x for the number 3 for
example.
Press button 2 to determine the second (middle) position
of the three-digit code. The LED flashes 5x for the
number 5 for example.
Press button 3 to determine the third (right) position of
the three-digit code. The LED flashes 9x for the number
9 for example.
The LED does not flash for the number zero.
< Back Finish
29 -
23.01.2008 14:36:44 23.01.2008 14:36:44