Miscellaneous Commands; Calibration Specific Commands - Promax GR-205 Manuel D'instructions

*SRE?
*STB?
*WAI

6.3.5 Miscellaneous Commands

*IDN?
*TST?
*TRG

6.3.6 Calibration Specific Commands

See Service Manual for details of calibration specific commands.
Page 34
Returns the value of the Service Request Enable Register
in <nr1> numeric format. The syntax of the response
is<nr1><rmt>.
Returns the value of the Status Byte Register in <nr1>
numeric format. The syntax of the response is<nr1><rmt>.
Wait for Operation Complete true. As all commands are
completely executed before the next is started this
command takes no additional action.
Returns the instrument identification. The exact response is
determined by the instrument configuration and is of the
form <NAME>, <model>, 0, <version> <rmt> where
<NAME> is the manufacturer's name, <model> defines the
type of instrument and <version> is the revision level of the
software installed.
The generator has no self test capability and the response
is always 0 <rmt>.
The generator has no trigger capability.
USER'S MANUAL. GR-205
09/2004