Editing And Cursor Movement Commands; System Commands - Promax GR-205 Manuel D'instructions

6.3.2 Editing and Cursor Movement Commands

FSTEP <nrf>
DBSTEP <nrf>
MVSTEP <nrf>
UVSTEP <nrf>
STEP_UP
STEP_DOWN
FIELD_UP
FIELD_DOWN
FREQ_PTR
LEV_PTR
MOD_PTR
PKDEV_PTR
UTILS_PTR
STEP_PTR

6.3.3 System Commands

*RST
*RCL <nrf>
RPP_RST
*SAV <nrf>
Page 32
Set the frequency step size to <nrf> kHz
Set the dB step size to <nrf> dB
Set the linear step size to <nrf> mV
Set the linear step size to <nrf> uV
Performs the same function as pressing the
Performs the same function as pressing the
Performs the same function as pressing the FIELD
Performs the same function as pressing the FIELD
Moves the edit cursor to FREQUENCY and displays the
appropriate menu to make FREQUENCY viewable.
Moves the edit cursor to output LEVEL and displays the
appropriate menu to make output LEVEL viewable.
Moves the edit cursor to MODULATION and displays the
appropriate menu to make MODULATION viewable.
Moves the edit cursor to PK DEVIATION and displays the
appropriate menu to make PK DEVIATION viewable.
Moves the edit cursor to the last selected parameter on the
Utilities menu and displays the Utilities menu.
Moves the edit cursor to the last selected parameter on the
Step Size menu and displays the Step Size menu.
Resets the instrument to default settings with the exception
of all remote interface settings.
Recalls the instrument set–up contained in store number
<nrf>. Valid store numbers are 1–10. Recalling store 10
sets all parameters to default settings with the exception of
remote interface settings. An attempt to recall from a store
which has not been previously loaded with a set–up will
create an execution error.
It readjusts the reactive power protection disconnection
circuit. If the reactive power remains present, the
disconnection condition will be immediately reactivated.
Saves the complete instrument set–up in store number
<nrf>. Valid store numbers are 1 – 9.
USER'S MANUAL. GR-205

key

key


09/2004
key
key