Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Adding RISCO P2P Camera
1.
Recording Mode: If "Motion Detected" is selected, the NVR will record only
if motion is detected by the camera. If continuous is selected, the camera
will record continuously.
2. Click Save & Continue. Repeat the procedure for the other cameras until all
cameras you have selected for the NVR are setup.
3. For Wi-Fi Cameras, the following screen opens.
4.
Select the required network and then enter the password.
Figure 9 Add Camera
Figure 10 Connecting to Wi-Fi
12
Publicité
Table des Matières
