Philips 27PT8420 Guide D'utilisation Rapide page 11

9
T
he HDMI Input Jacks provide
HDMI Inputs at 1080i for
accessories like HD Receivers.
Connect an HD Receiver to
the HDMI Input: Please refer
to your Receiver's Owner's
Manual for more detailed
hookup options.
1
If using a Satellite Dish,
Cable signal or Antenna
signal, connect the 75
ohm round cable from a
Satellite Dish to the
SATELLITE IN and/or the
Cable and Antenna signals
to the ANTENNA "A" or
"B" IN on the back of the
HD Receiver.
2
Connect another 75 ohm
round cable from the OUT
TO TV jack on the HD
Receiver to the 75 ohm IN
on the back of the TV.
3
Connect a HDMI cable
from the DVI OUT on the
HD Receiver to the HDMI
Input jack on the back of
the TV.
4
Connect the Audio L(eft)
and R(ight) cables from
the AUDIO Outputs on the
HD Receiver to the AV1
AUDIO Inputs on the back
of the TV.
NOTE: This is not needed if the
HDMI Input jack on the TV is
connected to a HDMI output in
the HD Receiver.
5
With both the HD Receiver
and the television ON,
press the CH + or CH –
button on the remote to
tune to the HDMI Channel
and view the video input
from the HDMI supplied
signal.
HDMI I
NPUT
ACCESS CARD
SATELLITE
IN
Coaxial
Cable Lead-in
from Satellite
Dish
C
ONNECTION
Back of TV
2
4
L
R
L
R
DIGITAL AUDIO VCR AUDIO
OUTPUT CONTROL
PHONE JACK
Coaxial Cable Lead-
1
in from Alternate RF
Signal Source
VOL
3
S-VIDEO
VIDEO
ANTENNA B ANTENNA A
OUT TO TV
IN IN
1
Coaxial
Cable
Lead-in from
Cable Outlet,
Converter Box, or
VHF/UHF
Antenna
1