Bluetooth Settings - JVC KD-ADV6580 Manuel D'instructions

Bluetooth settings

You can change the settings listed on the right column
according to your preference.
1
Select "BT-PHONE" or "BT-AUDIO."
2
Enter the Bluetooth menu.
3
Select "SETTINGS."
4
Select a setting item.
* 1
Appears only when a Bluetooth phone is
connected.
* 2
Appears only when a Bluetooth phone is
connected and it is compatible with text message
(notified through JVC Bluetooth adapter).
* 3
Bluetooth Audio: Shows only "VERSION."
5
Change the setting accordingly.
Setting menu ( : Initial)
AUTO CNNCT (connect)
When the unit is turned on, the connection is
established automatically with...
OFF : No Bluetooth device.
LAST : The last connected Bluetooth device.
ORDER : The available registered Bluetooth
device found at first.
AUTO ANSWER
Only for the device being connected for "BT-PHONE."
OFF : The unit does not answer the calls
automatically. Answer the calls
manually.
ON : The unit answers the incoming calls
automatically.
REJECT : The unit rejects all incoming calls.
MSG INFO (message info)
Only for the device being connected for "BT-PHONE."
AUTOMATIC : The unit informs you of the arrival of
a message by ringing and displaying
"RCV MESSAGE" (receiving message).
• The display illuminates in blue (see
<RING COLOR> on page 41).
MANUAL : The unit does not inform you of the
arrival of a message.
MIC SETTING (microphone setting)
Only for the device being connected for "BT-PHONE."
Adjust the volume of the microphone connected to the
Bluetooth adapter.
LEVEL 01/02/03
VERSION
The Bluetooth software and hardware versions are
shown.
SETTINGS 47