Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Listening to the iPod/iPhone
You can connect the iPod/iPhone using the following cable or adapter:
To
Listen to the
USB 2.0 cable (accessory of the iPod/iPhone)
music
to the USB input terminal of the unit.
Interface Adapter for iPod, KS-PD100 (not
supplied) to the CD changer jack on the rear
of the unit.
Watch the video USB Audio and Video cable for iPod/iPhone,
KS-U29 (not supplied) to the USB input
terminal of the unit.
• Disconnecting the iPod/iPhone will stop playback. Press SRC to listen to another playback source.
• For details, refer also to the manual supplied with your iPod/iPhone.
Caution:
• Avoid using the iPod/iPhone if it might hinder your safety while driving.
• Make sure all important data has been backed up to avoid losing the data.
When connected with the USB cable
There are 2 control modes in "USB (iPod)" source.
• <HEAD MODE> : Control by this unit.
• <IPOD MODE> : Control by the connected iPod/iPhone.
Make sure <AV ON> is selected for <AV IN> when using KS-U29 to connect, see page 42.
Preparation: Select the controlling terminal, <HEAD MODE> or <IPOD MODE> for iPod playback:
• Press and hold BACK button.
• Make the selection from <IPOD SWITCH> setting, see page 42.
Cable/adapter
To operate
See "When connected with the USB cable" below.
See "When connected with the interface adapter"
on page 35.
See "When connected with the USB cable" below.
• Make sure <AV ON> is selected for <AV IN>,
see page 42.
• Turn on the monitor to watch the video.
Continued on the next page
EXTERNAL DEVICES
31
Publicité
Chapitres
Table des Matières
Dépannage
