Errors And Possible Rectification - exonda M41 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 86
6

Errors and possible rectification

Overheat protection
Recirculated air filter and air filter
Time control
The appliance switches off during operation:
Overheat protection
1st
switch switched off the
appliance.
Overheat switch
2nd
switched off the
appliance again
The appliance switches off after 120 minutes of continuous operation:
Safety off
No error. The safety off
1st
switched off the
appliance.
The appliance has insufficient drying power:
The recirculated air
1st
filter
is soiled.
The timer does not run down completely when times of less than 15 minutes
are set:
No error. The time
1st
spring has a setting
tolerance.
Should further errors occur or the rectification measures listed fail to eliminate
the error, write down the error messages displayed and contact your Customer
Service Centre for your own safety.
Switch off appliance at ON/OFF switch  .
Allow appliance to cool down.
Remove plug  .
Check air filter as described in sections 5.3
and 5.4 and change if necessary.
Switch off appliance at ON/OFF switch  .
Remove plug  .
Attach a FAULTY sign to the appliance.
Contact Customer Service.
Switch off appliance at ON/OFF switch  .
Switch on appliance again at ON/OFF switch
 . The appliance is ready for operation
again.
Switch off appliance at ON/OFF switch 
or air filter
Remove plug  .
Check air filter as described in sections 5.3
and 5.4 and change if necessary.
First set the time control  to a higher value
(e.g. 30 minutes) and then turn it back to the
desired time.
54
GB

Publicité

Table des Matières
loading

Table des Matières