Changing Air Filter; Changing Recirculated Air Filter - exonda M41 Mode D'emploi

5 Cleaning and changing air filter
Figure 06
Figure 07
① Air grille
② Centre line
③ Positioning aid
5.3

Changing air filter

Change the air filter  at least every 3 months to ensure the proper functioning
of your hood hairdryer
Follow safety instructions as described in section 5.1.
1st
filter cover 
Turn the
2nd
air filter 
Take the out of the appliance and replace it..
3rd
filter cover 
Put the on and turn it to the right (clockwise) as far as it will
4th
go.
5.4

Changing recirculated air filter

Change the recirculated air filter  at least every 3 months to ensure the proper
functioning of your hood hairdryer.
Follow safety instructions as described in section 5.1.
1st
CAUTION – Damage to the appliance - Do not use tools:
•
Only undo / tighten the fastening screw  with a suitable coin (e.g.
10 pence piece).
To take out the fastening screw  ,
2nd
pence piece) to the left (anticlockwise).
hairdryer dome 
Take hold of the
3rd
appliance.
CAUTION – Risk of injury:
•
If the appliance is operated without the
hairdryer dome 
the
fan impeller under the
•
• Do not operate the appliance without the
hairdryer dome 
or the
Take the recirculated air filter 
4th
Insert the hairdryer dome 
5th
the appliance's imaginary
•
You will find the positioning aid ③
notch on the lower edge of the
•
hairdryer dome 
The entire
fastening screw 
Screw in the
6th
and tighten.
Check that the hairdryer dome 
7th
53
Figure 06
to the left (anticlockwise) and remove.
Figure 07
unscrew with a suitable coin (e.g. 10
with both hands and take it out of the
recirculated air filter 
, the customer's hair can get entangled in the
air grille ①.
.
out of the appliance and replace it.
in such a way that the
centre line ②.
in the form of a visible and perceptible
hairdryer dome  .
head piece  .
must sit inside the
with a suitable coin to the right (clockwise)
is securely in place.
GB
or
recirculated air filter 
positioning aid ③ sits on