Making And Receiving Phone Calls; Listening To Music Via A2Dp; Fm Radio; Radio Tuning - SCHUBERTH SRC SYSTEM PRO Mode D'emploi

7.2 MAKING AND RECEIVING PHONE CALLS

Tap µ or speak any word loudly to answer by VOX
Answer a call
Remain silent for 15 seconds, or press µ for 2 seconds
Reject a call
µ
End a call Tap
Voice Dial* (if supported
Press for 2 seconds and follow the prompt from the
by mobile phone) mobile
Redial*
Press for 2 seconds
Tap µ three times
Hot Dial*†
Set default mobile‡ While on a phone call, press for 5 seconds
µ
Change default mobile In Standby, press for 5 seconds
INTERCOM CONFERENCE MODE
Add/Remove Channel "A"
v
Tap while on a phone call
to/from a call
Add/Remove Channel "B"
v
Double-tap while on a phone call
to/from a call
* This feature is not available during mobile calls.
† Before using Hot-Dial, configure your Hot-Dial number via the Cardo Community or the Cardo
Smartset App.
‡ If 2 mobile phones are paired directly to your unit, set one to use as default for outgoing calls.
|
SRCS Pro
36

7.3 LISTENING TO MUSIC VIA A2DP

Available only on AVRCP compatible Bluetooth audio sources
µ
ß In Standby, tap
Play
Press µ for 2 seconds
Pause/Stop ß
µ
ß With music ON, tap
Next Track
With music ON, double-tap µ
Previous Track* ß
+ -
With music ON, press (scans up) or (scans down) for
Music Scan
5 sec. The first few seconds of each track will play.
To stop the scan on the current track, say any word loudly
Stop Scan
µ
into the microphone or tap
*With some phones you may need to repeat this action
SWITCHING BETWEEN A2DP AUDIO SOURCES
If a Music Player is paired, the SRC-System™ PRO will use it as the default A2DP
audio source.
1. Stop the music playback from the current device.
2. Start music playback from the other device.
7.4 MUSIC SHARING
Rider and passenger can listen to the same music (within a range of
10m / 33 ft)
Music Sharing works only with A2DP (Bluetooth stereo) enabled
devices. To share your music with your riding partner, your SRC-System™ PRO
unit [SENDER] needs to be paired to the other unit [RECEIVER] on CHANNEL A and
the RECEIVER must be in Standby mode.
[SENDER] Start/Stop +
During A2DP music playback, press for 2 seconds
sharing your music
[RECEIVER] Stop music +
Press for 2 seconds
sharing
Phone/Intercom calls and GPS audio navigation will override music playback.
Music Sharing does not transmit voice audio and cannot be used as an Intercom call.

8. FM RADIO

Your SRC-System™ PRO includes a built-in FM radio with a 6 Preset
memory and RDS (Radio Data System).
RDS allows the radio to automatically retune to the strongest
frequency available for the FM station you are listening to when the
signal becomes too weak.
ß µ
Turn on Radio In standby, double-tap
ß µ
Turn off Radio Press for 2 seconds
ß µ
Next Station With radio ON, tap
Previous Station ß With radio ON, double-tap µ
RDS ON/OFF
With Radio ON, press + and - simultaneously for 2 seconds
(Default: Off)

8.1 RADIO TUNING

Preset stations can be saved via the Cardo Community, the Cardo Smartset App or
directly on your unit.
1. Turn on the Radio.
2. Select a Preset number you wish to set (Preset 1 – 6) by tapping until the desired
µ
preset is heard.
3. Find an FM station to save using Seek or Scan.
µ
Choose a preset by tapping
Seek up/down and Save
Press + or - for 2 seconds
(Find the next FM station)
Tap µ within 20 seconds to save to current preset
With Radio ON, press + for 5 seconds
Scan and Save:
To stop search, tap +
(Automatically scans up for
Tap µ within 20 seconds to save to current preset
a station)
To continue scan, wait for the next station to be found.

8.2 AUTOMATIC RADIO TUNING

This feature makes finding new stations fast and easy by automatically creating a
temporary list of 6 radio stations.
1. With the radio on, press - for 5 seconds.
2. The radio will search upwards (higher frequency) from the current station and
store the next 6 FM stations it discovers.
3. If desired, repeat to store the next 6 FM stations.
These 6 temporary stations cannot be saved and do not replace the FM Presets you may
have saved.
Turning off the unit will clear the temporary stations and restore the FM Presets.

9. TROUBLESHOOTING

If your SRC-System™ PRO stops responding, reset it by turning it off
Reboot
s
and then on again (press for 2 seconds).
Reset Pairing
+
1. In Standby, press for 5 secs until LED flashes RED/BLUE.
(Deletes all
µ
2. Press for 2 seconds until LED flashes 5 times in PURPLE.
paired devices)
SRCS Pro
|
37