Wind Chill Factor; Ec Declaration Of Conformity; Disposal - Bresser ClimaTemp FW Mode D'emploi

• GUST: highest wind speed (gust) recorded from last reading
The wind level provides a quick reference on the wind condition and is indicated by a series of text
icons:
Wind level
Speed
Select wind speed unit
1. Press the WIND button for approx. 3 seconds to enter the setting mode.
2. Press the UP or DOWN button to change the unit between mph (miles per hour), m/s (miles per
second), km/h (kilometer per hour) or knots.
3. Press the WIND button to save the settings and exit the setting mode.

26 Wind chill factor

The wind chill factor is shown in the "WIND CHILL" field on the display.
Note:
The wind chill factor is based on the common effects of temperature and wind speed.The displayed
wind chill is calculated solely from temperature and wind speed and is measured by the outdoor
sensor.

27 EC declaration of conformity

Hereby Bresser GmbH declares that the radio equipment type with 7002410 complies with Directive
2014/53/EU. The full text of the EC declaration of conformity is available at the following Internet ad-
dress www.bresser.de/download/7002410/CE/7002410_CE.pdf

28 Disposal

Dispose of the packaging materials properly, according to their type, such as paper or card-
board. Contact your local waste-disposal service or environmental authority for information
on the proper disposal.
Do not dispose of electronic devices in the household garbage!
According to the European Directive 2012/19/EU on Waste Electrical and Electronic Equip-
ment and its transposition into national law, used electrical equipment must be collected sep-
arately and recycled in an environmentally sound manner.
LIGHT MODERATE
1 – 19 km/h 20 – 49 km/h
STRONG STORM
50 – 88 km/h > 88 km/h
31 / 80