Table des Matières
Publicité
c)
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
d)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
e)
If a fire starts, use solely powder or carbon dioxide
(CO
) fire extinguishers suitable for use on live
2
devices to put it out.
f)
Use the device in a well-ventilated space.
2.3. Safe device use
a)
Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces
the risk of accidental activation.
b)
When not in use, store in a safe place, away from
children and people not familiar with the device,
who have not read the user manual. The device may
pose a hazard in the hands of inexperienced users.
c)
Maintain the device in a good technical state.
d)
Keep the device out of the reach of children.
e)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
f)
To ensure the operational integrity of the device, do
not remove factory fitted guards and do not loosen
any screws.
g)
When transporting and handling the device between
the warehouse and the destination, take into account
the occupational health and safety principles for
manual transport operations which apply in the
country where the device will be used.
h)
It is forbidden to move, adjusting and rotating the
device in the course of work.
i)
Do not leave this appliance unattended while it is
in use.
j)
Clean the device regularly to avoid a durable
encrustation of dirt.
k)
Do not place heavy objects on the device.
l)
Keep packaging elements and small assembly parts
in a place not available to children.
m)
There is a risk of a child getting stuck inside the
device. Before storing the device withdrawn from
use, it is necessary to dismantle the door and to
leave the shelves in their place, so that children
cannot easily enter the interior.
n)
The device is not a toy. Children should be supervised
so that they will not play with the device.
o)
ATTENTION! DANGER TO LIFE! While cleaning, never
immerse the device in water or other liquids.
p)
Do not store heavy, poisonous or corrosive objects
in the device.
q)
Do not use the device in unheated premises and
locations with high air humidity.
r)
ATTENTION! The ventilation openings of the
appliance should always be free from blockages.
s)
ATTENTION! Do not use any electrical appliances
inside the chamber of the appliance which serves to
store food.
t)
ATTENTION! The appliance in its design contains
flammable gases serving for insulation. For this
reason at the end of its service life the appliance
should be handed over for disposal by professionals.
u)
It is not allowed to store potentially explosive
substances in the appliance, e.g.: cans containing
compressed flammable gas.
8
v)
It is forbidden to place the device near an open
flame, electric stoves, coal stoves or other heat
sources, as well as near direct sunlight. High
temperatures can damage the cooling capacity and
rise the consumption of electricity.
w)
The machine is not designed to be handled by
persons (including children) with limited mental
and sensory functions or persons lacking relevant
experience and/ or knowledge unless they are
supervised by a person responsible for their safety
or they have received instructions on how to operate
the machine
3. Use guidelines
Fridge is designed for cooling and keeping food products
at low temperature.
The user is liable for any damage resulting from
nonintended use of the device.
3.1. Device description
Model RCGK-48L
1
6
2
7
3
8
4
9
5
Model RCGK-35L
1
2
3
4
5
Rev. 02.01.2019
1.
Thermostat knob
2.
LED lamp
3.
Fan and ventilation openings
4.
Shelf
5.
Feet
6.
Hinge
7.
Small bottle shelf
8.
Door seal
9.
Large bottle shelf
10.
Door
11.
Drip tray (at the back of the device)
3.2. Preparing for use
Appliance location
Ensure good ventilation in the room in which the device is
used. Keep a minimum distance of 5 cm from each wall of
the device and 10 cm from the back of the device and other
objects. Keep the device away from hot surfaces. Operate the
device on flat, stable, clean, refractory and dry surfaces out
of the reach of children and people with mental disabilities.
Install the device making sure that constant access to the
main plug is ensured. The power cord connected to the
appliance must be properly grounded and correspond to
the technical details.
The appliance must be cleaned after unpacking and before
its connection to the power supply network. Load the device
once the pre-set temperature has been reached. Do not
load warm liquids and dishes into the device. In order to
ensure adequate air circulation inside the appliance it is
recommended to place products be in such a manner in
order to maintain distance between them. Do not cover the
vents. Do not open the lid or doors too often (for models
equipped with a lid or doors) and leave them open for
prolonged periods, this will increase energy consumption
and may lead to device damage.
•
When not in use make sure the doors are closed.
•
Do not use screwdrivers or other metal tools in order
to remove ice layers that are formed on the walls of
the appliance during its use.
•
Place the appliance on a flat, stable surface that will
withstand its weight together with its contents.
•
The device should stand on the feet in an upright
position.
10
3.3. Device use
First start up.
1.
Unpack the whole appliance.
2.
Remove all documents and other accessories from the
inside of the appliance.
3.
Slide the shelf into the guides.
4.
Level the appliance.
5.
Clean and dry the interior
6.
Close the door of the appliance.
7.
Connect the appliance plug to the socket.
6
8.
Set the cooling power to minimum, close the
appliance door and leave for approx. 2 hours.
9.
After waiting the recommended time, set the cooling
power to the desired level. You can put food products
8
inside the device.
When the set temperature is reached, the device ceases
to cool. If the temperature inside the device increases, the
cooling starts again.
10
Rev. 02.01.2019
In order to adjust the height or level the device, the feet of
the device must be unscrewed or screwed in.
Setting the temperature
The temperature inside the device can be adjusted using the
thermostat knob. Markings on the thermostat:
MIN – minimum cooling power
MED – average cooling power
MAX – maximum cooling power
MED
1
MIN
MAX
2
1.
Thermostat knob
2.
LED lamp (on the bottom wall of the thermostat
housing)
The temperature should be set depending on:
•
ambient temperature
•
quantity of stored food
•
opening frequency
CHANGE OF DIRECTION OF DOOR OPENING
In the device it is possible to change the side to which the
door opens.
Depending on the needs, the door can open to the left or
to the right.
In order to change the direction of door opening follow the
instructions below.
1.
Remove the cover (1), remove the four screws (2) and
remove the upper hinge (3).
2.
Remove the blind stopper (4)
3.
Remove the door (5)
4.
Remove the four screws (6) and remove the bottom
hinge (7).
5.
Unscrew the leg (8)
6.
Install the bottom hinge (7) with the four screws (6)
on the other side of the device.
7.
Screw the leg (8) on the other side of the device.
8.
Install the door (5) on the bottom hinge.
9.
Install the upper hinge (3) by means of the four
screws (2) so that it will fit the door. Install the cover
(1).
10.
Install the blind stopper (4).
1
2
4
7
3
6
7
1
2
6
8
3
7
4
8
9
Publicité
Table des Matières
