MasterCraft 058-1289-2 Manuel D'installation page 13

GROUNDING INSTRUCTIONS (CONTINUED)
•
Improper installation of the grounding plug can result in a risk of electric
shock. If repair or replacement of the cord or plug is necessary, do not connect
the grounding wire to either flat blade terminal. The wire insulation having an
outer surface that is green with or without yellow stripes is the grounding wire.
•
This product is for use on a nominal 120 V circuit. A cord with a grounding
plug, as shown here, must be used.
•
Make sure that the product is connected to an outlet having the same
configuration as the plug (see Fig. 3). No adaptor should be used with this
product.
•
Check with a licensed electrician if the grounding instructions are not
completely understood, or if in doubt as to whether the product is properly
grounded. Do not modify the plug provided; if it will not fit the outlet, have the
proper outlet installed by a licenced electrician.
Fig.3
PLUG
GROUNDING
PIN
13
R
R
GROUNDED
OUTLET