MasterCraft 058-1289-2 Manuel D'installation page 10

10
model no. 058-1289-2 | contact us 1-800-689-9928
CONTROLLING THE COMPRESSOR
ON/OFF SWITCH (A, Fig. 2)
•
This switch turns on the compressor. It is operated manually, but when in the
ON position, it allows the compressor to start up or shut down automatically,
without warning, upon air demand. ALWAYS set this switch to OFF when the
compressor is not being used, and before unplugging the compressor.
PRESSURE RELIEF VALVE (B, Fig. 2)
•
If the pressure switch does not shut down the motor when pressure reaches
the preset level, this valve will pop open automatically to prevent over-
pressurization. To operate manually, pull the ring on the valve to relieve air
pressure in the tank.
TANK PRESSURE GAUGE (C, Fig. 2)
•
This gauge measures the pressure level of the air stored in the tank. It is not
adjustable by the operator, and does not indicate line pressure.
CAUTION
•
Do not continue to use the compressor when the gauge is damaged.
•
Bring a broken gauge to the nearest authorized service centre, and a specialist
technician will replace it.
AIR LINE OUTLET (D, Fig. 2)
•
Connect air hose to this outlet.
Fig.2
headline bars headline bars
continuation tabs continuation tabs
notes notes
warnings warnings
A
C
B
D