IDEAL ACC 55 Mode D'emploi page 20

ACC 55
About the HEPA filter
The two HEPA filters remove the smallest
air particles that could negatively affect your
well-being. This includes household dust,
dust mites and pollen. In order to provide
clean operation and achieve sufficient
evaporation output, the evaporator cartridge
must be changed regularly.
As a general guideline, both HEPA filters
should be replaced annually. If the air is
highly contaminated, such as in urban areas,
then it may be necessary to change the
particle filters earlier. You can identify when
a HEPA filter has reached the end of its life
by significant discoloration on the filter.
The HEPA filter No. 8710 007 is available at
your IDEAL specialist dealer or in our
online store: www.ideal-health.de.
Technical specifications
Power supply voltage
Recommended room size
Power consumption (Level I, II, III)
Air recirculation with activated carbon filter (Level I, II, III)
Air recirculation without activated carbon filter (Level I, II, III)
Evaporation output (Level I, II, III)
Tank capacity
Dimensions (L × W × H)
Weight (incl. filter)
Cable length
Noise (Level I, II, III)
Changing the HEPA filter (18 - 20)
• Switch off the ACC 55 and remove the
front cover.
Disconnect from the mains!
• Remove the used HEPA filters and
dispose of them with your regular
household waste.
• Write the current date in the label field on
the new HEPA filters.
• Insert the new HEPA filters.
• Reattach the front cover.
- 20 -
230 V

up to 55 m² (590 sq ft)
22 / 25 / 34 W
140 / 190 / 270 m³/h
(82 / 110 / 159 CFM)
150 / 220 / 290 m³/h
(88/130/170 CFM)
140 / 190 / 250 g/h
(0.88 / 1.22 / 1.58 gal./day)
8,4 l (2.2 gal.)
550 × 330 × 600 mm
(22 x 13 x 24 inch)
9,3 kg (20.5 lbs)
2,6 m (8.5 ft)
35 – 55 dB(A)
50 Hz