Zolia Teach'n Learn Mode D'emploi page 5

Warm Notice
Please keep in mind the dog channel you choose, Please do not change to another one or the remote
control will be invalid.
You need to pair the remote transmitter and receiver before use.Please follow the manual when you
use it at the first time.
The remote will fall into sleep mode after 30 seconds of no interaction.You can reactivate it by
pressing any button.
When the transmitter is turned off, it will not produce any functions when pressing its buttons except
for the LED light.
TEST PET TRAINING SYSTEM
Static stimulation function test
Static stimulation function can not be seen with the naked eye, please use our test light.
Press the static stimulation function button, the test light will shine.
Vibration function test
Press the vibration function button, the receiver will shake.
Tone function test
Tone function does not need to adjust.
Press the tone button, the receiver will make a sound.
Description on the modes between Remote Dog Training and Automatic Anti Bark:
● This model could also be used as Automatic Anti Bark Collar. Turn on the remote, press and
hold the remote power button for 3 seconds, if the receiver beeps twice, it means the anti bark
collar function is off now. Press and hold the remote power button for 3 seconds, if the
receiver beeps once, the anti bark collar function is on now.
● The automatic anti bark function has been set as the factory default setting before the
shipment, therefore,there is no need to adjust individually. Could be worn on the neck of dogs
directly when turning on the power.
● Following is how the automatic anti bark mode works:
○ When the dog barks, the anti-barking device will produce a 2 -second warning sound.
○ When the second bark occurs within 30 seconds, the device will produce a 3-second
warning sound.
○ When the third time barks within 30 seconds, the anti-barking device will play a
warning sound for 5 seconds along with a weak static stimulation punishment to the
dog, to remind the dog of remembering not barking when hearing the warning sound.
○ This kind of training will repeat for 7 times. The 1-2 times are warning sounds only, If
the dog keeps barking, it will trigger the 3-7 times sound + static mode. The strength
of the static stimulation increases step by step, to correct the dogs behaviour.
5