Broan Elite EQLD1 Série Manuel D'installation, D'utilisation Et D'entretien page 18

7 ] For framed cabinet, secure the hood to the EZ1 brackets using four (4) no. 8-18 x 1/2" metal
8 ] For frameless cabinet, secure the hood to the cabinet using four (4) no. 8 x 5/8" round head
9 ] Attach power cable to the hood using the strain relief.
18
screws with washers (screws and washers included in parts bag). Insert two (2) screws and
washers per side, in the slots (as shown in insets on illustration below).
wood screws (screws and washers included in parts bag). Insert two (2) screws and washers
per side, in the slots (as shown in insets on illustration below).
M
ETAL
S
CREWS
FRAMED
CABINET
FRAMELESS
CABINET
W
OOD
S
CREWS