Stroller Assembly; Open Stroller; Assemble Storage Basket; Assemble Front Wheels - Joie mirus Manuel D'utilisateur

!
For infant child restraints used in conjunction with a
chassis, this vehicle does not replace a cot or a bed.
Should your child need to sleep, then it should be
placed in a suitable pram body, cot, or bed.
!
The parking device shall be engaged when placing and
removing children.
To avoid injury ensure that your child is kept away when
!
unfolding and folding this product.

Stroller Assembly

Please read all the instructions in this manual before assembling and using this product.

Open Stroller

- 1
Push secondary lock 2 and squeeze one-hand-fold button.
to open. Latches should click into place.
!
Check that the stroller is completely open before continuing.

Assemble Storage Basket

Insert storage basket plastic ends into the corresponding openings on the back of the stroller.

Assemble Front Wheels

Assemble front wheels to front legs. Check that wheels are securely attached by pulling on wheel assemblies.
The front wheels can be disassembled by pressing the snap buttons.

Assemble Rear Wheels

Assemble rear wheels to rear legs. Check that wheels are securely attached by pulling on wheel assemblies.
Wrap the storage basket around frame and brake axle, and then snap into place.
The rear wheels can be disassembled by pressing the snap buttons.

Assemble Armbar

Align the axle with the hole in the side armrest, then insert to assemble with a "click."
Align the other end of the armbar with matching component, and then push down to lock.
The completely assembled stroller is shown as

Stroller Operation

Fold Stroller

Before folding, pull up hood.
11
- 2
2 Meanwhile, pull the stroller backward
3
6
7
8
9 .
Push secondary lock
A click sound means the stroller is folded completely.
!
The stroller can not be folded when the handle is on the front.

Adjust Recline

Recline Backrest
There are 4 angles for the backrest.
To recline the backrest, squeeze the recline handle on the back of the seat
To raise the backrest, push up.
!
Make sure the recline is set properly for use.

Use Armbar

Press armbar release button
component, and then push down to lock.
Tip Armbar can be open for easy seating and unseating of child.

Use Buckle

Release Buckle
Press the center button to release the buckle.
Lock Buckle
Match the waist belt buckle with the shoulder buckle
A click sound means the buckle is locked completely.
4
!
To avoid serious injury from falling or sliding out, always secure your child with harness.
!
Make sure your child is snugly secured. The space between the child and the shoulder harness is about the
thickness of one hand.
!
Do not cross the shoulder belts. This will cause pressure on child's neck.
5
Use Shoulder & Waist Harnesses
!
In order to protect your child from falling out, after your child is placed into the seat, check whether the
shoulder and waist harnesses are at proper height and length.
- 1
17 Shoulder harness anchor A
- 2
17 Shoulder harness anchor B
- 3
17 Slide adjuster
For larger child, use shoulder harness anchor A and the highest shoulder slots. For smaller child, use shoulder
harness anchor B and the lowest shoulder slots.
Use either shoulder harness anchor in the slots that are closest to child's shoulder height.
Use slide adjuster to change the harness length.
- 2
Press the button 19
Tip
For larger child, use the highest shoulder slots. For smaller child, use the lowest shoulder slots.
- 1 - 2
10 and squeeze one-hand-fold button 10
11
- 1 - 2
, and then pull up the armbar
14 14
15
- 1
16 , and click into the center buckle.
- 3
16
- 1
19
, while pulling the waist harness to proper length.
. Push the stroller forward to fold.
12 , pull down on the backrest. 13
. Align the armbar end with matching
- 2
16
18
- 3
19
12