Technical Data; Scope Of Delivery; Accessories - Storch Jumbo Mode D'emploi

4. Possible causes of error
Air build-up in the suction hose (syphon).
Interruption of suction is triggered.
The immersion pump runs, but no water flows.
Immersion pump switches off.
Immersion pump in continuous operation.

(5) Technical data

5.1 Scope of delivery

5.1.1
STORCH Jumbo vacuum cleaner, Art. No. 65 69 00
Suction head with safety socket 16 A
Pre-separation tank with immersion pump
10 m suction hose
10 m outlet hose
Water intake nozzle
Metal intake tube
5.2 Immersion pump
A/C 230 V, 50 Hz
Power consumption: 1.36 A
Output: 0.30 kW
Delivery head 1/3/5 m
Vol. m2/h 8.2/5.9/2.8
Dirty water outlet 1"
Dirty water temperature max. 60° C
5.3 suction head
A/C 230 V, 50 Hz
Power consumption: 4,8 A
Output: 900 W, (1.100 W max.)
Socket: 2.000 W max., 16 A
Translation of the original instruction
The suction hose is too long or is sagging too steeply.
Blockage in the suction hose.
Filling level in the container too high: filter blocked.
Immersion pump not connected.
Power supply for the immersion pump is interrupted.
Air build-up in the pump chamber: briefly unplug the
immersion pump's plug from the socket and plug back in.
Water temperature above 60° C,
Filter not used,
Pump blocked by dirt.
Sliding switch on the immersion pump in continuous opera-
tion position (push downwards).

6. Accessories

6.1
Task: Clean/strip surfaces
Standard cleaning attachment flex,
Art. No. 65 81 50
Cleaning attachment flex for small surfaces,
Art. No. 65 81 20
6.2
Task: Collect waste waster
Water intake nozzle,
Art. No. 65 10 30
Metal intake tube 120 cm,
Art. No. 65 10 10
Suction hose extension, 10 m,
Art. No. 65 70 10
20