Lifebreath RNC Série Mode D'emploi page 23

Dimensional Drawing for RNC5-TPD/TPF/ES Models
Outside
Recirculating
Defrost Damper
(For TPD Model
Only)
Filters
Removable
Heat Recovery
Core
Motorized
Impellers
Condensate Drains
Dimensional Drawing for 95 Model
Blower
Removable
Heat Recovery
Core
Condensate
Drain
Dimensional Drawing for 155 Model
Fresh Air
From Outside
Recirculating
Defrost
Damper
Removable
Heat
Recovery
Core
Stale
Air To
Outside
Condensate Drain
Stale Fresh
Stale
Air To Air From
Air From
Outside
Inside
22 3/4 in (578 mm)
Front View
18 1/2 in (469 mm)
Front View
Stale Air
From Inside
Filter
33 5/8 in (854 mm)
Front View
Fresh
Air To
Note: Front clearance of 25 in (635 mm)
Inside
is recommended for servicing unit. All
ducts use 5 in (125 mm) oval collars,
balancing dampers are located on all
collars.
Fresh Stale
Air From Air To
Outside
Outside
Fresh Stale
Air To Air From
Inside Inside
Top View
Blower
Motor
Fresh
Air To
Inside
Top View
Note: Front clearance of 25 in
(635 mm) is recommended for
servicing unit. Round duct
connections are 5 in (127 mm)
and oval collars use 6 in
(152 mm) connections.
14 3/4 in (375 mm)
Note: Front
clearance of 25 in
(635 mm) is
recommended for
servicing unit. All
ducts use 6 in (152
mm) connections.
Side View
22