Description Of Symbols - Silverline 30-135A Mode D'emploi

GB
Introduction
Thank you for purchasing this Silverline tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and, even if
you are familiar with similar products, it is necessary to read this manual carefully to ensure
you fully understand the instructions. Ensure all users of the tool read and fully understand
this manual.
6
Original Instructions

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection.
Read instruction manual.
Wear protective clothing
Wear protective shoes
Class I construction (protective earth)
Indoors use only!
Toxic fumes or gases!
Risk of fire!
Risk of electrocution!
Hot surfaces - DO NOT touch!
DO NOT use in rain or damp environments!
Caution!
Danger of ultraviolet radiation!
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer
for recycling advice.
Conforms to relevant legislation and safety standards.
Single phase transformer-rectifier
1~
Welding power sources which are suitable for supplying power to welding
S
operations carried out in an environment with increased risk of electric shock
(if applicable)
Dual roller wire feed
Metal inert and active gas welding including the use of flux cored wire
Supply circuit: single phase alternating current, 50Hz rated frequency
1-50Hz