Publicité
Les langues disponibles
Les langues disponibles
Mirror Installation Prep:
1.
Remove the mirror assemblies from packaging. Verify that the mirrors are in
good condition and that all the hardware is present. Items 1-7 and 8-10 will
be pre-assembled. The mirror kit includes extra clamps to fit various tube
shapes/sizes and not all hardware will be used depending on application.
For installing onto round tubing, use the bottom plastic clamp (item #8)
2.
with the top metal clamp (item #9) and fasten with socket screws (item #10).
Position the top metal clamp (item #9) around the tube, then assemble the
bottom plastic clamp (item #8) onto the tube and fasten together with socket
screws (item #10) as shown. (See illustrations 1-1 and 1-2).
plastic clamp can be orientated vertically or horizontally as shown.
For vehicles that have an integrated mirror mounting bracket (example
3.
Polaris Ranger), only the flat mounting bracket (item #7) will be used. The
pan screw (item #12) and small locknut (item #11) will be used to secure to
vehicle mount tab as shown. (See illustration 1-3).
For Polaris vehicles with wiper kit installed, only the flat mounting bracket
4.
(item #7) will be used. The thread forming screw (item #13) will be used to
secure to wiper box as shown. (See illustration 1-4).
4a.
Remove the two switches from wiper box as shown. (See
illustration 1-5).
4b.
Remove the wiper box cover by removing four #10 x 3/4"
screws as shown. (See illustration 1-6).
4c.
Drill holes of size #36 (0.1065") in the boss of the wiper box
cover from inside as shown. (See illustration 1-7). Reinstall the
cover and switches.
4d.
Install the mirror flat bracket mount (item #7) onto the wiper box
using the two thread forming screws (item #13).
For flat drillable surfaces (example roofs and windshield cross-
5.
members), only the flat mounting bracket (item #7) will be used. The pan
screw (item #12) and small locknut (item #11) will be used to secure to drilled
surface. Drill hole thru surface and mount the flat bracket (item #7).
Ill. 1-5
Ill. 1-4
7
13
Ill. 1-6
© 2017 Kolpin Outdoors Inc.
Note, the
Ill. 1-2
8
10
11
Ill. 1-3
Ill. 1-7
2
REV 00
8
9
Roll Cage
Round Tube
7
Vehicle Rear
Mirror Tab
Ill. 1-1
10
9
12
Publicité
