Kolpin Outdoors 98300 Guide D'utilisation

Universal UTV Rear View Mirror
Product Instructions | Part No: 98300
Before you begin, read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation
instructions for future reference and parts ordering information.
Kit contents:
Item Qty Part Description
1 1 Rearview Mirror Assembly, Center
2 1 Threaded Ball Stud
3 1 Arm Clamp Back
4 1 Arm Clamp Front
5 1 Thumb Screw
6 1 Hex Locknut, Zinc Plated, M6-1.0
7 1 Flat Mount Bracket
8 1 Bottom Tube Plastic Clamp
9 1 Top Tube Metal Clamp
10 2 Socket Screw, Zinc Plated, M6-1.0 x 40mm LG
11 2 Locknut, Zinc Plated, #8-32
12 2 Pan Screw, Zinc Plated, #8-32 x 0.5in LG
13 2 Thread Forming Screw for Plastic Clamp
This mirror is designed to quickly and
easily universal mount to any tubular bar,
specifically UTV roll cages, or flat drillable
surfaces. The kit fits tubing sizes from
1-1/2" to 2.0" in diameter. The clamp can
be used in the vertical and horizontal
positions. The double ball joint is easy to
adjust and increases viewing positions.
Note, installation may be easier if
certain items are removed from vehicle
first.
Tools and Supplies Required
5mm Hex Allen Wrench or Socket Bit
•
T20 Bit Screwdriver
•
11/32" Wrench or Socket
•
Ratchet (if sockets are used)
•
store. Call us to help, Toll Free 1-877-956-5746.
Kolpin Outdoors, Inc. | 9955 59th Ave N | Plymouth, MN 55442
(877) 956-5746 or (763) 478-5800 |
© 2017 Kolpin Outdoors Inc.
Note: If any hardware is missing, do not return to the
6
3
2
1
www.kolpin.com | customerservice@kolpin.com
1
REV 00
9
8
11
7
13
4
5
10
12