System Testing; Service Mode - Mopar KJ Mode D'emploi

System Testing

1. Use the following checklist to ensure all features function as indicated.
R emote start - Press start button 2X.
R emote stop - Press and hold start button for 2 seconds.
Hood safety switch shutdown - While under remote start, open hood - engine should shut down.
Brake safety shutdown - While under remote start, press brake - engine should shut down.
Key-in-sense circuit - With key in the ignition cylinder, remote start should not activate.
Overrev shutdown - While under remote start, press accelerator - system should shut down at 3X idle.
S ervice Mode - With ignition turned on with key, press remote start button 3X. R epeat to exit S ervice Mode.
Heater/Air Conditioning - E nsure Heater/AC works during remote start.

Service Mode

Service mode is used whenever it is necessary to disable the remote start
feature, such as during vehicle service. The vehicle will not start by remote if
Service mode is activated.
1. Entering Service mode.
A. Turn ignition on with the key.
B. Press the start button on the remote transmitter 3 times. 2 seconds later,
the horn will chirp and the lights will flash 3 times, indicating the system
is in Service mode.
C. While in Service mode, whenever a remote start attempt is made, the
horn will chirp and the lights will flash 3 times alerting the user that the
system is in Service mode.
2. Exiting Service mode.
A. Turn ignition on with the key.
B. Press the start button on the remote transmitter 3 times. 2 seconds later,
the horn will chirp and the lights will flash 1 time, indicating the system
has exited Service mode.
14