Mopar KJ Mode D'emploi page 11

Option Programming - continued.
E. Pressing and releasing the programming button again will put the system
into Option Bank 2. The horn will chirp and the lights will flash 5 times
indicating the system has entered Option Bank 2.
F. Press and release the brake pedal to cycle through the options in Bank 2.
Notes:
1. Once the system has reached the last option in a bank, pressing and
releasing the brake pedal will return back to option 1 in that bank.
2. Once the system has reached Option Bank 2, pressing and releasing the
programming button will return back to Option Bank 1.
3. To reset options back to their default setting, while in option learn mode,
push and hold the transmitter button until the horn chirps and lights flash
5 times.
It is recommended to use the default crank delay for the diesel Liberty. If
the owner insists on a 30 second delay, follow the procedure described
below.
3. Diesel Vehicle Programming (setting delay before crank)
A. Close hood.
B. Turn the ignition to the "on" position.
C. Press and hold the programming button. After 10 seconds the horn will
chirp and the lights will flash 3 times.
D. Release the programming button.
E. Press and release the programming button again. The horn will chirp and
the lights will flash 4 times indicating the system has entered Option Bank
1.
F. Advance to option 6 by pressing and releasing the brake pedal 6 times.
The horn will chirp and the lights will flash 6 times indicating the system is
at option 6.
G. Press the KEY icon button on the remote control transmitter 1 time. The
harness mounted red LED will turn on solid to indicate that the diesel timer
feature has been turned on.
H. Turn the ignition key to the "off" position to exit programming.
11