OERTLI AD223-RS 100 Notice D'utilisation page 9

3 Heating and domestic hot water temperature setting
3.1 Heating temperature setting
Select the comfort temperature
by pressing the corresponding key. The set temperature
appears on the left of the display.
3.2 DHW set temperature
Select the domestic hot water temperature using the
4 Programming
30/11/10 - 300010275-001-B
or the reduced temperature
key.
AD223 - RS 100
Adjust the set temperature using keys + and -.
The bar graph displays the heating programme for the current
day.
The room temperature measured is shown in the zone to the right
of the display.
Adjust the set temperature using keys + and -.
The graphic bar displays the heating programme for the circuit
displayed for the current day.
The temperature given by the domestic hot water sensor is shown
in the zone to the right of the display.
To programme every day of the week identically, press once on key
(heating) or
flash.
To programme one day in particular, select it by pressing key
or several times.
- Use key to define the "comfort" or "tank loading enabled"
periods in 1/2 hour stages (dark areas on the bar graph).
- Use key to define the "reduced" or "tank loading disabled"
periods in 1/2 hour stages (light areas on the bar graph).
- Use the return key if you make a mistake.
- When programming is completed, press key MODE.
Simultaneously press the
to reinitialize programmes to the factory settings (heating
"comfort": from 6 h to 22 h ; domestic hot water "comfort": from
5 h to 22 h).
( domestic hot water): All "day" arrows
and keys for 5 seconds
9