5
"Summer" operation with outside sensor
Heating is automatically cut off during summer when the 2 hours
average outside temperature is higher than the "comfort"
temperature setting.
6
Error display
The error codes which may appear on the boiler are reported on the
EASYMATIC control unit. In this instance, note the error code and
call the fitter.
7
Replacing the batteries
When the batteries have to be replaced, the battery symbol flashes
in the display.
Use commercially available alkaline batteries type LR6 AA
1.5 V.
Do not use rechargeable batteries.
10
Heating is started again when the 2 hours average outside
temperature drops below the "comfort" temperature.
For example: ALtH Communication error between the boiler and the
remote control.
See: Control panel instructions.
The display on the remote control shows "init" for a few seconds
during which the remote control can be synchronized. The boiler
must be switched on.
Settings previously made remain in the memory. Only the time has to
be set.
AD223 - RS 100
30/11/10 - 300010275-001-B