Calibrate The Bicycle - Batavus ION Mode D'emploi

• Service indicator
The display shows a spanner (H) with five dashes
when it is time for service. Contact your bicycle
repair shop.
3.4

Calibrate the bicycle

It may be necessary to calibrate the electronics if
the power decreases over time.
1. Stand next to the bicycle.
2. Switch off the lights.
3. Set the peddling assistance to OFF.
4. Press the M button 5 seconds. -0-0- will, next,
be displayed on the display. Now the bicycle
has been calibrated.
Do not remove the rear wheel. This may affect the performance
of the bicycle.
71
69