3/ Learning For The Shutter Travel Time - DELTA DORE TYXIA 641 Notice D'installation

3/ LEARNING FOR THE SHUTTER TRAVEL TIME

EN
Perform a complete cycle from stop to stop:
1- Lower or raise the roller shutter completely to the stop.
2- Do the reverse action until the opposite stop is reached.
1
2
Do not interrupt the roller shutter travel.
Note:
The learning for the shutter travel time adjusts itself automatically for each
complete cycle from stop to stop.
If the power of the motor connected is below 45W, or if there is an electric motor,
perform this step manually (see additional notice on the pages
for the TYXIA 5630-5730 on the DELTA DORE website).
43