Multi-Grater - SEVERIN KM-3916 Mode D'emploi

GB

Multi-grater

Dear Customer,
Before using the appliance, please read the
following instructions carefully and keep this
manual for future reference. The appliance
must only be used by persons familiar with
these instructions.
Connection to the mains supply
Make sure that the supply voltage
corresponds with the voltage marked on the
rating label of the appliance. This product
complies with all binding CE labelling
directives.
Familiarisation
1. Carrying handle
2. Drive unit
3. Power cord with plug
4. On/Off switch
5. Insert mounting (with insert)
6. Dispenser chute
7. Locking ring
8. Grating chamber
9. Pestle with lid (and stored inserts)
Important safety instructions
∙ In order to avoid hazards, and to
comply with safety requirements,
repairs to this electrical appliance or
its power cord must be carried out by
our customer service. If repairs are
needed, please send the appliance
to our customer service department
(see appendix).
8
∙ Before cleaning the appliance,
ensure it is disconnected from the
power supply and has cooled down
completely.
∙ To avoid the risk of electric shock, do
not clean the drive unit with liquids or
immerse it.
∙ All detachable parts should be
cleaned in hot soapy water after
each cycle of use.
∙ For detailed information on cleaning
the appliance, please refer to the
section Cleaning and care.
∙ Caution: The slicing, shredding and
grating accessories are extremely
sharp. To prevent injury, take special
care when handling these parts.
∙ Caution: Any misuse can cause
severe personal injury.
∙ Always switch the appliance off and
remove the plug from the wall socket,
- when there is no supervision,
- before assembling or
disassembling the appliance,
- in case of any malfunction during
use,
- before cleaning,
- after each cycle of use.