Electrical Connection - Dacor DOC30M977D Instructions D'installation

Electrical connection

WARNING
Electrical Shock Hazard
• Disconnect power before servicing.
• Use 8-gauge, solid-copper wire.
• Ground the oven.
This oven is manufactured with a neutral (white) power supply wire and a cabinet-
connected ground (green or bare) wire twisted together.
UL-listed or
CSA-approved
conduit
connector
Electrical Connection Options Chart
If your home has:
14
English
/ " (1.3 cm)
1
2
/ " (1.3 cm)
1
2
1. Disconnect power.
2. Feed the conduit through the opening in
the cabinet.
3. Remove the junction-box cover, and install
a UL-listed or CSA-approved conduit
connector to the junction box.
4. Route the oven conduit to the junction box
through the conduit connector.
5. Tighten the conduit connector screws.
6. See the chart below to complete
installation for your electrical connection.
Go to section:
4-Wire Cable from Home Power Supply
3-Wire Cable from Home Power Supply