Installation instructions
the
Prepare
oven
WARNING
Excessive Weight Hazard
To avoid personal injury and property damage, at least two people should move and
install an oven.
1.
Avoid drilling or cutting into house wiring during installation.
2.
To avoid floor damage, set the oven on a cardboard pad. Do not lift by any part of
the frame or handle.
3.
Remove the packaging and tape. Keep the packaging needed for installation.
4.
Remove the hardware package from the bag containing literature.
5.
Remove racks, etc. from the oven chamber.
6.
Move oven and cardboard close to the installation site.
Remove and reinstall the oven door
IMPORTANT: Lay a blanket or packing material on a flat, sturdy surface. Use two hands
to remove the lower oven door, and lay it on the blanket/packing material.
The microwave-oven door is not removable.
Disconnect LED light wire harness
Wire Harness
Locate the LED wire harness and disconnect
it before removing the door.
11
English