User Guide; Emergency Stop Button - Mobiclinic GRÚA FORTUNA Mode D'emploi

Electric Patient Lift FORTUNA

5. USER GUIDE

5.1. Use of controller:
Control the up and down of lifting arm by up and down button
on the controller.
Patient lift stop working once releasing the up and down button,
Up bu�on

5.3. Emergency Stop Button:

Emergency stop button is used for switching on/off the power. It enables the motor stop working immediately in case of danger.
Switch off: press on the red button (see image A), then control device is suspended.
Switch on: rotate the red button clockwise (see image B) and control device is activated.
Highly recommended to press on this button if patient lift is not in use beyond 3 days to prolong the lifespan of battery.
5.4. Emergency descent and ascent:
In case of malfunction on the controller or no controller, to press
the ascent and descent button to get the actuator back in place.
Ascent Button
Descent Button
5.5.1.Inset 4 wire into 4 different
ports accordingly one by one .
5.2. Base Width Adjustment:
Down
bu�on
5.5. Connection of Control Device:
For controller
For actuator
5.5.2.There is a plastic cap which is used for
covering the power apply port after
charging.
PT DE IT
Width of base can be adjusted by pedal.
Slam on pedal on the left for a wider base and to slam on
pedal on the right for a narrow base
There are 4 ports on the control device, 1 for controller,
2 for actuator, and the rest 1 for power supply
5.5.3. After charging, fix the wire on
FR EN ES
For power supply
For actuator (Optional)
the"T"knob.
13