Installation Procedure - Mobiclinic GRÚA FORTUNA Mode D'emploi

PT DE IT FR
4. INSTALLATIONS 4. INSTALLATIONS
4.1. Inspection and Acceptance 4.1. Inspection and Acceptance
Please verify if there are omissions for parts (checklist for accessories Please verify if there are omissions for parts (checklist for accessories
shall be subject to list attached with the product). shall be subject to list attached with the product).
DESCRIPTION DESCRIPTION
Frame Frame
Control Box Control Box
Actuator Actuator
Controller+Cable Controller+Cable
Open Spanner Open Spanner
#16 and #17 #16 and #17
User's manual User's manual
Step 3: Installation of control box Step 3: Installation of control box
1. Fasten the 2xM5x10 screws into threaded holes on frame as the 1. Fasten the 2xM5x10 screws into threaded holes on frame as the
following picture shown following picture shown
Step 4: Remove and install the battery box Step 4: Remove and install the battery box
Removal: Press down the switch A and remove battery along direction Removal: Press down the switch A and remove battery along direction
of B. of B.
Installation: Place the battery in place and press the switch along direction of Installation: Place the battery in place and press the switch along direction of
C. Ensure the battery won't be separated without pressing the switch. C. Ensure the battery won't be separated without pressing the switch.
12
EN ES
QUANTITY QUANTITY IMAGE IMAGE
1 set 1 set
1 pc 1 pc
1 pc 1 pc
1 set 1 set
1 pc 1 pc N/A N/A
Electric Patient Lift FORTUNA

4.2. Installation Procedure

4.2. Installation Procedure
Please verify if there are omissions for parts (checklist for Please verify if there are omissions for parts (checklist for
accessories shall be subject to list attached with the product). accessories shall be subject to list attached with the product).
Step 1: Release the locknut and bolt and then raise up the Step 1: Release the locknut and bolt and then raise up the
frame and align the holes. Fix bolt as shown in drawing on the frame and align the holes. Fix bolt as shown in drawing on the
right and have not properly attached (make sure no movement right and have not properly attached (make sure no movement
on the frame). on the frame).
Step 2: Release the strap Step 2: Release the strap
① Locknut ① Locknut
② Bolt ② Bolt
③ Strap ③ Strap
2. Rotate the lock to direction of open. Fasten to control box into frame 2. Rotate the lock to direction of open. Fasten to control box into frame
and have the upper screws locked. and have the upper screws locked.
3. Rotate the lock 90 degree to the right and lock the control box. 3. Rotate the lock 90 degree to the right and lock the control box.