Operation - Omcan MS-IT-0220-B, MS-IT-0220-U Manuel D'instructions

Operation

USING THE MACHINE
LOADING THE PRODUCT ON THE TRAY AND SLICING
• Ascertain that the thickness control knob is correctly positioned to '0'.
• Draw back the carriage completely (towards the operator) to loading position.
• Lift the product grip by pulling it away by 10 cm from the blade and put it in rest position.
• Lay the product to be sliced against the guide plate on the operator side.
• Secure by means of the product grip by exerting a slight pressure.
• Adjust the thickness gauge. Start the blade by turning the switch or by pressing on the white or green
button.
• Grip the handle affixed onto the plate and start the forward and backward cutting movement. The product
travels towards the guide plate by gravity.
• When the product weight or its dimensions do not provide a satisfactory cut by effect of the gravity, use the
product grip handle.
• When finished, return the thickness control knob to '0' and draw the carriage back.
• Stop the blade by pressing the black or red button.
Maintenance
CLEANING THE SLICER
GENERAL
The machine must always be accurately cleaned at least once a day, and more often if necessary.
Always use protective gloves.
10