Omcan MS-IT-0220-B, MS-IT-0220-U Manuel D'instructions page 9

The user is responsible for ascertaining that the electrical system is suitably dimensioned and functions
correctly (supply line, outlet, distribution panel, differential protecting breaker, grounding).
Before carrying out the connection ascertain that the mains characteristics correspondent to those indicated
on the machine plate.
COMMANDS
START AND STOP BUTTONS / SWITCHES
• Turn switch or press the white or green button (1) to start running the blade.
• The light turns on to indicate that the machine works correctly.
• Turn switch or press the red or black button to stop the blade.
Slice thickness can be adjusted by turning the graduated knob (4) counterclockwise.
Thickness adjustment range: see paragraph "Technical description and conditions of use".
FUNCTIONING TEST AND BLADE ROTATION DIRECTION
Start the machine and check whether the light is on; make sure that the blade rotates in the direction indicated
by the arrow (counterclockwise if you look at the machine from the blade plate side).
• Ascertain that the carriage and the product grip slide correctly.
• Ascertain that the gauge plate works and adjust thickness to desired value.
9
Installation