Wireless Footswitch; Footswitch Operation; Functions - Chauvet DJ GigBAR MOVE Manuel De L'utilisateur

Operation

Wireless Footswitch

The included wireless footswitch provides quick access to preset colors, color-change programs, and
sound-activation through the GigBAR MOVE microphone.
To use the footswitch:
1 2 3

Footswitch Operation

Pedal
1
(Auto Programs)
2
(Sound Mode)
3
(Static Colors)
4
(Blackout)
The GigBAR MOVE footswitch will work properly in any mode, with a maximum
unobstructed distance of 100 ft (30.5 m). You must turn on the ir on the GigBAR MOVE, set
the ir channel, and navigate to Auto mode before using the footswitch.
GigBAR MOVE User Manual Rev. 3
1. Connect the GigBAR MOVE to power. Turn the wireless footswitch
on.
2. Press <MENU> on the GigBAR MOVE until SYS shows on the
4
display, and press <ENTER>.
3. Use <UP> or <DOWN> to select FOOT then press <ENTER>.
4. Use <UP> or <DOWN> to select ON, then press <ENTER>.
5. Use the chart below to activate the desired function.
Action
Tap pedal to activate, then tap to
navigate to desired function
Press and hold
Tap
Tap

Functions

Auto programs
Sound-active programs
Cycles through colors
(Pars and Derby Lights ONLY)
Blackout
Page 21