Non-Interlocked Housing Warning; Laser Safety Notes - Chauvet DJ GigBAR MOVE Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Non-Interlocked Housing Warning

This unit contains high power laser devices internally.
Do not open the laser housing, due to potential exposure to unsafe levels of laser radiation.
The laser power levels, accessible if the unit is opened, can cause instant blindness, skin
burns, and fires.

Laser Safety Notes

STOP AND READ ALL THE LASER SAFETY NOTES BELOW
Laser light is different from any other light. Laser light can cause eye injury if the product is not set up and
used properly. Laser light is a thousand times more concentrated than any other kind of light. This
concentration can cause instant eye injuries by burning the retina (the light-sensitive portion at the back of
the eye). The heat from a laser light cannot be felt, but it can still injure or blind product operators and the
audience. Even very small amounts of laser light at long distances are potentially hazardous.
DO NOT assume that exposure to an individual laser beam is safe, even a tiny beam split off from a larger
beam. This laser product uses dozens of milliwatts of laser power—Class 3B levels internally—and splits
them into multiple beams—Class 3R levels. The individual Class 3R level beams are potentially hazardous
to the eyes.
DO NOT assume that a moving laser light is safe. Laser light is never without risk. Since eye injuries can
occur instantly, it is critical to prevent the possibility of ANY direct eye exposure. According to laser safety
regulations, it is not legal to aim Class 3R lasers into areas where people can be exposed, even if the laser
is aimed below people's faces, such as at a dance floor.
Do not operate the laser without first reading and understanding all the safety and technical
data in this manual.
ALWAYS set up and install all laser effects so that any laser light is at least 3 meters (9.8 feet)
above the floor on which people are standing. See the
After setup, and prior to public use, test the lasers to ensure they are functioning properly. Do
not use the product if any defect is detected.
DO NOT point lasers at people or animals.
DO NOT look into the laser aperture or laser beams.
DO NOT point lasers into areas where people could be exposed to them.
DO NOT point lasers at highly reflective surfaces such as windows, mirrors, and shiny metal.
Even laser reflections can be hazardous.
Never point a laser at aircraft; this is a U.S. federal offense.
Never point unterminated laser beams into the sky.
Do not expose the output optic (aperture) to harsh cleaning chemicals.
Do not use the laser if the housing is damaged, open, or if the optics appear damaged in any
way.
Never open the laser housing. The high laser power levels inside of the protective housing can
start fires or burn skin, and will cause instant eye injury.
Never leave this product running unattended.
The operation of a Class 3R laser show is allowed only if the lasers are operated by a skilled
and well-trained professional, who is familiar with the data included in this manual.
The legal requirements for using laser entertainment products vary from country to country.
The user is responsible for the legal requirements in the location/country of use.
CAUTION! Do not operate this device in ways not specified in this User Manual. Failure to
follow the instructions will void the warranty, may damage the product, or injure the user
or the audience.
CAUTION! This product cannot be discarded with household waste. Contact your local
waste management service for electronic disposal regulations in your area.
Page 6
Before You Begin
Proper Usage
section of this manual.
GigBAR MOVE User Manual Rev. 3

Publicité

Table des Matières
loading

Table des Matières